Brass strip for tube and electronic application -C26000(H70)
Alloy | National brand number | UNS, USA | EN Standard brand |
CuZn30 | H70 | C26000 | CW505L |
CuZn33 | H68 | C26200 | CW506L |
CuZn36 | H65 | C26800 | CW507L |
CuZn37 | H63 | C27400 | CW508L |
Chemical composition | ||||
---|---|---|---|---|
Brand | Chemical composition (mass fraction)% | |||
Cu | Fe | Pb | Zn | |
H70a | 68.5-71.5 | ≤0.10 | ≤0.03 | Rem |
H68 a | 67.0-70.0 | ≤0.10 | ≤0.03 | Rem |
H65 a | 63.0-68.5 | ≤0.07 | ≤0.09 | Rem |
H63 a | 62.0-65.0 | ≤0.15 | ≤0.08 | Rem |
a Cu plus the sum of the listed elements≥99.7% |
Parameters of different thickness intervals:
Thickness one | |||
---|---|---|---|
Thickness,mm | Tolerance,mm | Thickness,inch | Tolerance,inch |
0.04- 0.05 (0.05) - 0.15 (0.15) - 0.20 (0.20) - 0.30 (0.30) - 0.40 (0.40) - 0.50 |
± 0.003 ± 0.005 ± 0.007 ± 0.010 ± 0.012 ± 0.015 |
0.00138 - 0.0020 (0.0020) - 0.0039 (0.0059) - 0.0079 (0.0079) - 0.0098 (0.0098) - 0.0157 (0.0157) - 0.0197 |
± 0.00012 ± 0.00020 ± 0.00028 ± 0.00039 ± 0.00047 ± 0.00059 |
Minimum thickness, rolled state 0.04mm 0.001575 inch Minimum thickness, rolled state 0.04mm 0.001575 inch |
Width | |||
---|---|---|---|
Width,mm | Tolerance,mm | Width,inch | Tolerance,inch |
15 - 100 (100) - 200 (200) - 250 |
± 0.075 ± 0.1 ± 0.15 |
0.6 -4 (4) - 8 (8) -10 |
± 0.003 ± 0.004 ± 0.006 |
Note 1: If the demander requires one-way deviation, it shall be indicated in the contract (or purchase order), and the allowable deviation value shall be twice of the value in the table. Note 2: Other foils with allowable deviation may be supplied upon agreement of both parties. |
Side bending, maximum side bending/Copper strip foil per 2 m (50inch) | |||
---|---|---|---|
Width,mm | Arc height,mm | Width,inch | Arc height,inch |
15 -30 (30) - 100 (100) -250 |
10 8 6 |
0.6 - 1.2 (1.2)-4 (4) - 10 |
0.4 0.3 0.24 |
Mechanical property | ||||
---|---|---|---|---|
Brand | State | Tensile strength | Hardness,HV | |
MPa | Ksi | |||
H70 H68 H65 H63 |
H02 | 380-460 | 55-67 | 115-160 |
H04 | 440-540 | 64-78 | 135-185 | |
H06 | 570-670 | 83-97 | 180-225 | |
Note: Supply of foil for other properties by agreement. |
Thickness two | |||||
---|---|---|---|---|---|
Thickness,mm | Allowable thickness deviation,mm | Thickness,inch | Allowable thickness deviation,inch | ||
Width 50-200 | Width (200)-400 | Width 2-8 | Width (8)-16 | ||
(0.5) - 0.8 (0.8) - 1.2 (1.2) - 2.0 |
± 0.025 ± 0.030 ± 0.040 |
± 0.030 ± 0.035 ± 0.045 |
(0.0196)-0.0315 (0.0315)-0.0472 (0.0472)-0.0787 |
±0.0010 ±0.0012 ±0.0016 |
±0.0012 ±0.0014 ±0.0018 |
Width | ||||||
---|---|---|---|---|---|---|
Width range | 50-200 mm | 2-8 inch | (200)-300 mm | (8)-12 inch | (300)-450 mm | (12) -18 inch |
Permissible width deviation | ±0.3 | ±0.012 | ± 0.4 | ±0.016 | ±0.6 | ±0.024 |
Note 1: If the demander requires one-way deviation, it shall be indicated in the contract (or purchase order), and the allowable deviation value shall be twice of the value in the table. Note 2: Other products with allowable deviation can be provided by agreement of both parties. |
Side bending, maximum side bending/copper strip per 2 meters (50inch) | |||
---|---|---|---|
Width,mm | Arc height,mm | Width,inch | Arc height,inch |
50 -100 | 12 | 2 - 4 | 0.472 |
(100)-450 | 8 | (4)-18 | 0.315 |
Note: Under different scale length (L), the side bending value (h) can be equivalent converted according to the formula: h=(L÷2)2×4(mm). |
Mechanical property | |||||
---|---|---|---|---|---|
Brand | State | Tensile strength | Elongation A50 %, not less than | Hardness, HV | |
MPa | Ksi | ||||
H70 H68 H65 H63 |
O60 | 310- 380 | 41-53 | 45 | 65 -85 |
O70 | 280 -350 | 60-75 | 50 | 55 -75 | |
Note: Products with other properties can be supplied by agreement of both parties. |